Ram force Cam- Driven Water Pump 

The Ramforce pump is a high capacity pump Capable of supplying your cooling needs In high performance applications Pump accepts standard 4 bolts cover

Price: $450.00
Plus Shipping

Replacement Impeller for Neovane Water Pump (A)

1″ Pump includes 0- ring seal these pump can easily be identified by the 2 retaining pins that retain the cover, one on each side.

Kits Includes:

• New impeller
• Shear pin & O -ring
• Fits pump V-105

Price: $65.00
Plus Shipping

Replacement Impeller for Neovane Water Pump (B)

Kits Includes:

• New impeller
• Shear pin
• And gasket
• Fits Pump numbers V-505, V-755, V-750

Price: $65.00
Plus Shipping

Replacement Impeller for Nicson Water Pump (C)

Kit Includes:

• Nicson style pumps
• With spline drive impeller
• A rubber o-ring

Price: $65.00
Plus Shipping

Replacement Impeller for Magnaflow Water Pump (D)
The 1 inch pump Impeller has 8 blades
The 3/4 inch pump Impeller has 12 blades

Kit Includes:

• New Rubber Impeller
• O-Rings
• Price: $65.00 Plus Shipping

Gen 4 BBC Billet Timing Covers   

• Billet Aluminum timing covers
  Beautiful Billet super strong
•  Cover accepts standard 4 bolts pumps Accepts BBC mark 4
  Click on the pic for a better view
  Price: $275.00 Plus Shipping   

Polished Cast Aluminum Water Divider Outlet

Chevy V8 With 2 1/2 Pipe Thread

Price: $55.00
Plus Shipping

Heavy Duty Prop Puller

Made from 4140 Steel and will work on 3 blades to.

Price: $150.00
Plus Shipping         

Brand New Casale V – drives

• 10 degree or 12 degree
• With or without a whirlaway
• 3 dog in and out

Price: $4,295.00
Plus Shipping

Brand New Mid Plates For Casale

• Mid plates are 3/8 thick and 24 inch wide
• They are Unpolished
• They are NOT cut out for large gears

Price: $195.00
Plus Shipping

V-Drive Bearing Puller

Price: $85.00

Plus Shipping

Whirlaway Kits

Whirlaway kits for 5 or 6 bolts lower housing
Please specify 5 or 6 bolt when ordering
check the 4 bolts on the shifter cover if it is a
5 /16 its a 5 bolt & if it a 1/4 20 bolt it a 6 bolt
Please specify left or right hand rotation
Please specify 1 inch or 1/1/8 prop shaft

Prices: $900.00              Normally $ 1100.00
Plus Shipping                Plus Shipping

Locking V- Drive Billet Shift Handles

Locking handle-  Aluminum
Includes locking- quadrant which bolts to v- drive

Please specify 5 or 6 bolt when ordering
check the 4 bolts on the shifter cover if it is a
5 /16 its a 5 bolt & if it a 1/4 20 bolt it a 6 bolt

5 bolt – A
6 bolt – B

Price: $175.00
Plus Shipping

V- Drive Split Case Gasket Set

Includes gasket for cases, caps, lower housing, side cover and o- rings

Price: $49.99
Plus Shipping

Water pick up for inboard steering 

Kit Comes with Water pick up tube, Hoses,4 fittings,
dill 1 hole and wield your tube on cut on 45 degree to length

Price: $175.00    
Plus shipping

Polished Aluminum Flip-Top Fuel Fill

This polished Aluminum fuel fill has been America’s No. 1 choice for decades.
It’s spring loaded flip top provides quick easy access.
The base of this cap measures 2.5 x 3.5 and accepts a 2″ fuel fill hose.

Price: $50.00
Plus Shipping

New Floor or Stringer Mount Foot Throttle

These throttles are cast from 356 aluminum and hand polished.
Available for floor or stringer mount applications.
These are great pedals. Does not come with cable.

Price: $175.00
Plus Shipping

Stringer Mount Peg Foot Throttle

Peg billet foot throttle machined from 6061 aluminum
Comes unpolished 

Price: $149.99
Plus Shipping    OUT OF STOCK

Triple Seal Prop Shaft Stuffing Box

Triple seal assembly – 1 ” Shaft                 $150.00 + Shipping  
Triple seal assembly     – 1 1/8″ Shaft        $150.00 + Shipping 

Overall length is 2 1/2 In.

Chrome Double Seal Rudder Stuffing Box

Chrome Bronze Double seal Models
The inside height of a double seal box is 3 inch

Doubles Seal for 1 in Rudder              $175.00 + Shipping      Out of Stock
Double Seal for 1 1/8 Rudder             $175.00 + Shipping      Out of Stock

2 3/8 from center to center Hole
Base size is 3 1/4 inch square

Chrome Single Seal Rudder Stuffing Box

Chrome Bronze Single seal Models
The inside height of a  Single seal box is 2 inch

Single  Seal for 1 in Rudder              $155.00 + Shipping    Out of Stock
Single  Seal for 1 1/8 Rudder            $155.00 + Shipping

2 3/8 from center to center Hole
Base size is 3 1/4 inch square

Chrome Prop Shaft Coupler

Steel Chrome split Coupler
for a 1 inch Shaft

4 Bolt Tightening and 2 Set Screws              $150.00 + Shipping  Out of Stock 
Coupler is 3 1/2 inch long & 2 around

Prop Shaft Coupler

Heavy Duty Steel split Coupler for a 1 1/8  Inch Shaft
Heavy Duty Steel split Coupler for a 1 Inch  Shaft

6 Bolt Tightening and 4 Set Screws                    $330.00 + Shipping
Coupler is 5 1/4 inch long & 2 1/4 around

Strut Bushing

Comes in 2 Inch Lengths only,  use one in each end of the Strut Barrel.
Delrin Water Lubricated Marine Strut Bushing.

Fiber 1- ID x 1 1/4  Barrel OD
Fiber 1- ID x 1 3/8  Barrel OD
Fiber 1 1/8 – ID  x 1 3/8 Barrel OD

Price: $30.00 each + Shipping

Dragboat Covers

• These are great Covers, they are water resistant
• Silver material reflects heat away from the boat.
• They will cover a Hydro or a Flat Bottom
• They are lite weight and will cover the whole boat.

Will NOT COVER A BOAT WITH A WING !!!!!

Price: $199.99 + Shipping

Motor Rails

• 1/4 thick 2 x 2 inch Wide
• 5 Ft. Long
• Not Polished

Price: $100.00 + Shipping

BBC Flywheel Cover

• This is a Light Weight, but very strong cover
• This is not the cheap, thin one that you see for sale
• Polished Aluminum Flywheel Cover

Price: $275.00 + Shipping OUT OF STOCK

Motor Mount Blocks

Precision Machined from billet 6061 T Aluminum
NOT polished

Price: $39.99 each + Shipping                            

Aluminum Stringer Mount Battery Boxes

• 26 inch Wide
• All Stainless Hardware included
• Will fit from a 24 Series Group Battery
• Polished Top Aluminum & Bottom NOT Polished
  can be Powder C, Chrome, Anodized

Price: $149.99 + Shipping   

New Tach Dash Mount  

Mounts on deck or cowling for easy visibility of tachometer.
Accommodates 3 3/8 Diameter tachometers.
polished aluminum
Comes with mounting hardware

Price: $160.00 + Shipping      

New Seat Braces

Nice new seat braces, very clean looking
Just drill your holes and bolt in.
Made from Aluminum, unpolished

Price: $89.99 each + Shipping  

Email – Heavyd@dragboatcity.com

New Carb Cable Brackets

This is a very clean looking Cable bracket
Made out of  6061 T Aluminum
Comes with SS bracket to fit your cable
ONLY fits a Holly Carb will NOT fit a Dominator
They  do not come polished

Price: $60.00 + Shipping

Email – Heavyd@dragboatcity.com

BBC NEW STAINLESS STEEL DRY HEADERS 

Price: $850.00 + Shipping      IN STOCK

Call – HD  239-277-9114
Email – Heavyd@dragboatcity.com

Polished Finish Billet Aluminum Self-Bailing “J” Drain 

They work GREAT never have water in the boat again
These billet aluminum self-bailing bilge drains are designed to attach to the back of the hull over the drain hole.
By incorporating a one-way rubber style flap they allow water to exit the boat while underway, yet restrict the water from entering the while stopped.
This drain measures 2″ X 2″ with a 1-1/2″ center drain hole. Bolt Holes are 1.340″ center to center.

Price: $35.00 + Shipping         

Call – HD  239-277-9114
Email – Heavyd@dragboatcity.com

Sanger Ski Hydro Splash Guards

Sanger Ski Hydro Splash Guard
Only have 1 left: smoke and light smoke

Price: $325.00 + Shipping                                         OUT OF STOCK

Call – HD  239-277-9114
Email – Heavyd@dragboatcity.com